Features of a Brady Cases Amp Case include:

Extremely durable case that meets and exceeds ATA 300 standards
High quality foam on all sides of the cab
Can be made a live-in case, pull-off, etc (see other auctions)
Latches tight and seals from water or external conditions (can be gasketed)
Your amp investment is solidly protected from the abuse of transport
We can house multiple cabs, racks, heads, compartments & drawers in any combination in any case
We are a custom case manufacturer and can meet any needs you have

Specifications:

Birch w/ ABS laminate (black 1/4 inch is standard)
4 inch heavy-duty casters w/ 2 locking mounted to a 3/4 inch casterboard
Hybrid valence tongue & groove
Double angle extrusion
Steel ball corners
High strength blind rivets either extrusion or washer backed
4 recessed handles total on sides (2 per side)
4 zinc recessed latches on front and back
1" ester foam in the top lid
1" rigid plank foam in the base of the case for support

Please Note: When measuring your amp, make sure you measure the width x height x depth, note if there is any slant at the base (some amps are narrower at the top than the bottom). On the height, exclude the feet and handles as they will sink into the foam. We give of wiggle room on the entire width and depth of the case to make the case come on and off easier so the foam doesn't pull the amp up with the lid. The foam is pretty forgiving and will provide plenty of shock-absorption, but let us know if you don't want to have the of extra room and to make it exact to the dimensions you provide in the notes when you check out.

4x12 or 4x10 cab case lift-off

Quantity